The Origin Of PLA And Its Importance In 3D Printing — fixdry Skip to content
The Origin Of PLA And Its Importance In 3D Printing

The Origin Of PLA And Its Importance In 3D Printing

PLA filament is one of the most popular 3D printing materials on the market. It's easy to work with and has a relatively low melting temperature, making it ideal for printing more complex objects.

PLA is made from natural crops such as corn or sugar cane. Most of these materials are converted into lactic acid, which is then polymerized into PLA by adding other chemicals. The resulting filament is extruded using a 3D printer.

PLA filaments can be printed at temperatures ranging from 190-230 degrees Celsius (374-446 F). While this makes it possible to print with a wide range of different plastics, it also means that PLA can be prone to warping when printed at high temperatures or under certain conditions.

PLA is the most popular 3D printing material. It's a bioplastic derived from renewable natural resources, such as corn starch or sugarcane. PLA filament is made from lactic acid, which is produced by bacteria in a process called fermentation. This process uses thermal energy from the sun and carbon dioxide from the air to create lactic acid. The lactic acid is then converted into PLA through a chemical reaction with alcohols (typically methanol or ethanol).

PLA filament has many advantages over other materials such as ABS and nylon:

PLA does not have any distinct smell when printing;

PLA is biodegradable and compostable;

PLA doesn't warp easily during printing;

PLA uses less energy during production than ABS;

PLA is a bioplastic that is made from corn or sugarcane. It is a natural alternative to ABS and PETG.

PLA is biodegradable, which makes it an ideal choice for environmentally friendly projects.

PLA has been known to have less warping problems than other filament materials, such as ABS. This makes it easier to print with and gives you a better chance of getting your project done in one piece!

PLA has a lower melting temperature than other plastics like ABS or PETG. It also has a slower print speed, so if you're looking for something that can be printed quickly then PLA might not be the best choice for you.

PLA is a good choice for beginners because it's easy to use, but also has many advanced features. PLA does not warp or shrink as much as other materials due to its high melting temperature of about 180 C. This makes it ideal for printing large objects without having to worry about them warping during cooling. PLA also has very little odor compared to other materials, so it is less likely to cause headaches or allergies.

PLA is prone to crystallization (also known as "hazing") when printing at higher temperatures (around 220 C), which can result in poor layer adhesion and print failure if left unchecked.

1. The history of PLA

In the early 1980s, Professor Shirose at Nihon University in Japan discovered that a combination of lactic acid and glycolic acid could be produced from starch. This was the first time that a biodegradable plastic had been developed from renewable resources.

In 1991, Professor Shimizu from Japan succeeded in producing polylactic acid (PLA) through chemical synthesis. In the same year, the PLA prototype was exhibited at an international plastics exhibition in Tokyo and attracted much attention. The polymer was patented by Nihon University in 1995 and commercialized soon after as NatureWorks PLA by NatureWorks LLC in 1998.

The first PLA was developed by NatureWorks, a subsidiary of Cargill, in the early 2000s. The company was trying to find a biodegradable alternative to PET (polyethylene terephthalate), which is used in water bottles and food containers. They found that by using cornstarch and sugars, they could create a polymer that could be easily processed into 3D printer filament.

The first PLA was brown in color and had poor thermal properties. It would warp during printing and required a heated print bed to print properly. The material also smelled bad when heated, which made it difficult to use indoors or with sensitive equipment like computers.

Over time, improvements were made to the polymerization process at NatureWorks so that now we have PLA filaments available in many colors and with better thermal properties than ever before!

2. What is PLA?

PLA is a thermoplastic polymer made from lactic acid and glycolic acid monomers via ring-opening polymerization (ROP). It belongs to the group of aliphatic polyesters and is one of the most commonly used bioplastics today due to its high impact strength, transparency and heat resistance.

3. How to produce PLA

PLA is produced by polymerizing lactic acid. Lactic acid is a natural compound found in many foods and plants. It is extracted from cornstarch or sugar cane, or can be made by bacteria that feed on lactose. The resulting polymer is then processed into pellets that are used to create 3D printed objects.

PLA has become the most popular 3D printing filament because it's easy to use and has a low melting point. It can also be recycled as compost or burned for energy recovery.

PLA comes in many different colors including white, black, orange, green, blue and red.

PLA is a bio-plastic made from corn starch, with a glycol-based plasticizer added to increase its flexibility and plasticity. It is therefore derived from renewable resources and is biodegradable.

PLA is derived from corn starch, which can be produced in a number of ways:

Fermentation: This process involves the fermentation of corn starch or glucose to produce lactic acid. A second fermentation step is then used to produce lactide, which can be used to produce PLA.

Ketone synthesis or direct esterification: An alternative method for producing PLA uses acetone as an ethyl alcohol surrogate, which is then reacted with glycol groups to produce PLA. The most common type of PLA produced by this method is poly (lactic acid) (PLA), although poly (glycolic acid) (PGA) can also be produced using this method.

Previous article Sustainable Innovation: Embrace Eco-Friendly Printing with Recycled 3D Printer Filament
Next article All You Need To Know About ABS 3D Printer Filament And 3D Printing

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare


Net Orders Checkout

Item Price Qty Total
Subtotal $0.00

Shipping Address

Shipping Methods