Clean, Crisp, and Clutter-Free: The Magic of 3D Printer Dryerbox — fixdry Skip to content
Clean, Crisp, and Clutter-Free: The Magic of 3D Printer Dryerbox

Clean, Crisp, and Clutter-Free: The Magic of 3D Printer Dryerbox

Dryerbox

The Dryerbox is a 3D printer accessory that can help you get rid of the mess that comes with 3D printing. It's a simple design, but it works!

The Dryerbox is a clever little device that uses a box fan to blow air across your printed parts while they're still hot. This allows you to remove them from the build platform and place them in the Dryerbox so they can cool down faster, saving you time and energy.

The thing about 3D printing is that it's not just one process. There are multiple parts to it. There's the creation of the model, the print time, and then the finishing of the product.

Let's say you've printed a beautiful model on your desktop 3D printer, but you're not happy with how it looks because there are some small imperfections in it. What do you do? You can try sanding it down or painting over it, but these methods are not fool proof. If you're looking for something more permanent, then here's where dryerboxes come in handy!

Dryerboxes are basically 3D printing boxes that help get rid of any residual moisture from your printed objects before they're ready to be handled by humans. This way they won't stick together or break apart while they're still wet with ink or paint. Dryerboxes come in all shapes and sizes so that they can accommodate any size object without taking up too much space in your home or office.

3D printing is an amazing technology that has revolutionized the way we manufacture things. It has also changed the way we think about designing and prototyping new products. However, there are a few challenges that come with 3D printing, such as how to dry your 3D printed parts and prevent them from warping or cracking.

The problem is that most people either don't have time to wait for their parts to fully dry or don't have enough space to leave them on their workbench for days. And even if they did, it would be impossible to ensure that every part was completely dry before removing it from the build plate or print bed.

That's why we created Dryerbox. Just place your printed part inside Dryerbox after printing and close the lid!

3D printing is a great technology, but it has its limitations. One of the biggest is that you need to clean up your work area after each print job.

Inkjet printers have a built-in cleaning function where the printer will automatically spray the nozzle with cleaner and then wipe it down. But if you’re using a 3D printer, you have to do this yourself — which can be a pain.

The Dryerbox is a device that lets you dry off your printed objects without making a mess or having to use paper towels. It uses ultrasonic vibrations to blow away excess water from your print without any mess.

As a 3D printing enthusiast and hobbyist, I've been using the same basic box for years. It's a simple wooden box with a hole in one side. I put it over my printer and feed the filament through the hole. After each print, I remove the filament from inside the box, then open up the top of the dryerbox and lay out my newly printed parts on its surface.

Benefits Of Using A Dryer Box With Your Printer

There are many benefits associated with using a dryer box with your 3D printer, including: Clutter-free printing - Most people who own 3D printers know what it's like when they try to print something and end up with piles of plastic shave.

But what if there was a way to get rid of that mess? What if you could have a clean, crisp 3D printer experience every day?

Well, there is a way. It's called Dryerbox.

Dryerbox is a device that allows you to dry your filament so that it doesn't warp before you use it. It also helps prevent clogs by preventing moisture from entering your extruder nozzle during storage. This allows you to store your filament for longer periods of time without worrying about it getting ruined by humidity or temperature changes (which cause warping).

The Dryerbox works by using a fan inside the box that blows air through holes in the top lid of your filament spool holder. This pulls moisture out of your spool when it evaporates into the air around it, leaving nothing behind but pure polyethylene plastic (no moisture).

When you're working with filament, it's not uncommon for your printer to spool it up into little circles or loops. These loops can be quite long and difficult to unwind, which means that they often get tangled up with each other. This causes massive clogs and tangles on your printer's extruder and spool holder — things that can take hours to fix.

How do we fix this problem? With dryerboxes!

As a 3D printing enthusiast, you're probably aware of the need to dry your prints after they come out of the printer. But did you know that the drying process can take up to 48 hours? Imagine having to wait that long before being able to use your new toy.

The solution is simple: a dryerbox! A dryerbox is basically a box with fans inside which can help accelerate the drying process. The air flow will be much more powerful than what you get from an ordinary fan and it will also be more consistent. The result? Your printed models will dry faster, resulting in less waiting time!

Previous article An In-Depth Look at Filament Dryer Boxes: Functionality and Benefits

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare

Net Orders Checkout

Item Price Qty Total
Subtotal $0.00
Shipping
Total

Shipping Address

Shipping Methods