The Introduction of PTC Heater — fixdry Skip to content
The Introduction of PTC Heater

The Introduction of PTC Heater

PTC is a heating element that can be used to dry the filament before it is extruded. This means that the filament will not absorb moisture from the air, which can lead to clogging, jamming and many other problems.

In this article, we will focus on the PTC heating element found in some 3D printing dryer boxes, and how it compares to the commonly used PI heating element.

Why Choose a PTC Heating Element?

PTC heating elements offer several advantages over the commonly used PI heating elements. One of the most significant advantages is energy efficiency. PTC heating elements require less power to maintain a constant temperature, which can result in significant energy savings over time. This is because PTC heating elements naturally regulate their temperature, which means they require less energy to maintain a consistent temperature than PI heating elements.

Another advantage of PTC heating elements is safety. PTC heating elements are less prone to overheating than PI heating elements, which can result in a safer and more reliable 3D printing environment.

Efficiency Improvements with a PTC Heating Element

The use of a PTC heating element in a 3D printing dryer box can result in significant efficiency improvements. PTC heating elements require less power to maintain a consistent temperature, which means they are more energy-efficient than PI heating elements. Additionally, PTC heating elements have a longer lifespan than PI heating elements because they are less prone to overheating.

PTC heating elements offer several advantages over the commonly used PI heating elements in 3D printing dryer boxes. They are energy-efficient, safe, and have a longer lifespan. If you are in the market for a 3D printing dryer box, consider choosing one with a PTC heating element for optimal efficiency and safety.

PTC Heater System in 3D Printer Filament Dryer Box

PTC heater system is a kind of temperature control device. It is used for controlling the filament temperature in the dryer box. The PTC heating element has the characteristics of self-heating and short-circuit protection. The PTC heater has long service life, good thermal stability and high reliability.

In general, there are two ways to control the filament temperature:

1. The first method is to use a thermocouple to sense the temperature of the filament, and then adjust it according to the measured value by controlling a heat source (such as an electric heater). This method can be used in most cases, but it requires a thermocouple that is accurate and stable, as well as a high precision electronic controller with large current capacity;

2. The second method uses a PTC heater instead of a thermocouple (or uses both together). This method has many advantages compared with conventional methods: it does not require calibration or adjustment before use; it does not require expensive equipment; it can be used under different operating conditions; it works continuously after power failure, etc..

The comparison between PTC and PI

1. PTC heater system is more accurate than PI, so the temperature control is more precise.

2. PTC 
heater system is more reliable than PI because it does not have any moving parts, and it does not need to be cleaned regularly.

3. PTC heater has a longer lifespan than the PI heating element, which can last for 10 years or more.

What is a PTC Heating Element?

PTC stands for Positive Temperature Coefficient, and it is a type of heating element that works by changing its resistance in response to changes in temperature. As the temperature of the PTC heating element increases, its resistance also increases. This means that it naturally regulates the temperature of the dry box, preventing it from overheating.

PTC heating elements are commonly used in hair dryers, ovens, and other heating appliances. They are highly efficient and safe, making them an excellent choice for 3D printing dry boxes.

PTC material can be used in applications such as thermal protection systems, where it is necessary to detect high temperatures and trigger an event to prevent damage.

PTC Heater System is a heating system that can be used for 3D printer filament dryer box. The PTC heater system is a self-regulating heating element that does not require any external control system or power supply. It is powered by a thermistor, which is used to monitor the temperature of the heater.

3D printing is a trendy and exciting new technology that can be used to create anything from toys to cars. However, it is not without its drawbacks. One of the most common problems faced by 3D printer owners is filament drying. This process can take several hours, which is not only inconvenient but also increases the amount of time required to print a model or part.

Previous article The Ultimate 3D Printer Filament Dryer Box: What to Know Before Buying
Next article PLA Filament Dryers: Your Guide to Choosing the Best Option for Your 3D Printing Needs

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare


Net Orders Checkout

Item Price Qty Total
Subtotal $0.00

Shipping Address

Shipping Methods