Print Dry Filament Dryer: Unleashing the Power of 3D Printing — fixdry Skip to content
Print Dry Filament Dryer: Unleashing the Power of 3D Printing

Print Dry Filament Dryer: Unleashing the Power of 3D Printing

The Importance of Keeping Filament Dry

3D printing is an amazing technology that allows us to create anything we want. The only limitation is our imagination! That being said, there are some things that can get in the way of our creativity, such as humidity and moisture. When left unchecked, these two elements can cause serious damage to your 3D printer and its components, such as the extruder nozzle and heat bed. They can also affect the quality of your prints by causing warping or other defects in the model’s surface finish.

Humidity can be a problem for 3D printers. The filament used in 3D printing has a tendency to absorb moisture, which can cause the extrusion nozzle to clog and print quality to suffer. When the filament absorbs water, it expands and becomes more difficult to use.

Results of Wet Filament in 3D Printing

Wet filament is a common problem that occurs in 3D printing because most filaments are made with water-soluble materials such as acrylonitrile butadiene styrene (ABS) or polylactic acid (PLA). These filaments do not dry quickly on their own and will often require special care to ensure they dry properly. This can make printing more difficult because it takes longer than usual for your model to finish drying before you can remove it from the printer bed without damaging it or yourself!

The filament drying process is one of the most important steps in 3D printing. The results of wet filament are disastrous. It reduces the quality of the print and can even ruin it. Wet filament is a big problem for 3D printers because it leads to bad prints, poor adhesion and clogging of nozzles. When using wet filament, your prints will have a glossy layer on top that looks like a mirror polish and doesn't burnish well or stick very well to other layers (the same way as if you tried to glue two pieces of glass together). Also, each layer will be covered by water droplets which means that after each layer is deposited, there will be a layer of liquid between them which makes it impossible for them to bond together properly.

Best Ways to Dry Filament

The best way to dry filament is to use a heated filament dryer. You can use this with both PLA and ABS filaments. The heated filament dryer will not only remove moisture from your 3D printed filament but it will also change the color of your filament by removing any colorant that may be in it.

The heated filament dryer works by heating up the air that is being blown through the printer nozzle. This causes the moisture in your filament to evaporate quickly and effectively. Some heated filament dryers even have a fan that blows on the nozzle while it is heating up, which helps remove the moisture even faster and more effectively than just blowing hot air on it alone.

Safety Tips for Filament Drying

Keep it clean: Dry filament dryers are made out of metal and plastic parts that can be damaged by water or humidity. Always keep them clean and dry when not in use.

Use quality materials: There are plenty of cheap options available in the market but they may not last as long as more expensive models.

Filament Storage for Future 3D Prints

3D printing has been around for decades, but it's only in the last 5 years that the technology has become affordable and accessible to regular people. A 3D printer can be used to make just about anything you can imagine, from toys to tools and even replacement parts for broken household items.

But if you've ever printed something on a 3D printer, you know that filament is not an unlimited resource. Once you start printing with it, you have to store it somewhere until you need it again.

Fortunately, there's a new product on the market that makes filament storage easy - the Filament Dryer. This innovative device allows you to store your filament in an airtight container until you're ready to use it again. The Filament Dryer also keeps moisture out of your filament so that it doesn't get moldy or unusable before you can use it again!

Unleash Superior 3D Prints

Imagine a world where you can print your own clothes, shoes and accessories. A world where you can print your own smartphone case to protect it from damage. In this world, you can even print your own jewelry!

When you purchase filament in a plastic bag, it’s exposed to moisture and other elements that can degrade its quality. The best way to store filament is in an airtight container or in a vacuum-sealed bag. This ensures that the filament stays as dry as possible.

But what if your printer doesn’t have a built-in filament dryer? You may get frustrated with poor-quality prints and wasted time trying to fix them.

That’s why we designed our Dry Filament Dryer – it unleashes the power of 3D printing by improving the quality of every print you make.

Previous article Affordable Filament Dryer: Keep Your 3D Prints Moisture-Free with Our Cheap Solution
Next article Introducing Fixdry - The Ultimate Solution for Drying Prints

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare


Net Orders Checkout

Item Price Qty Total
Subtotal $0.00

Shipping Address

Shipping Methods