Don't Let Moisture Ruin Your Prints: The Best Filament Dryer Options
One of the most common problems that 3D printer owners face is moisture issues. Moisture can ruin your prints, causing them to warp and become unusable. But there are ways to prevent this from happening.
The most effective way to dry your filament is with a filament dryer. A filament dryer will help you get rid of moisture in the filament and make sure it doesn't leave any residue behind. This means that your prints will be more consistent and reliable than ever before!
The most common type of filament dryer is an enclosed container that is heated to about 70°C (158°F). The filament is placed inside and left for a few hours to evaporate any remaining moisture. This method works well for smaller rolls but can be problematic if it's used with large spools that aren't completely sealed at both ends (i.e., the end where the filament comes out and the end where it goes back in).
A second option is a desiccant-based system that uses heat and vacuum to remove water from your filament. These systems are more expensive than enclosed containers but can be used with any type of spool size or shape.
Moisture can cause problems with both the print and the filament itself. If there's too much moisture in your filament, it can prevent your printer from extruding properly. And if there's too much moisture in the air surrounding your printer, it can cause warping and cracking in your prints.
Fortunately, there are several options available for removing this moisture from your filament before you print. Here are some of our favorites:
A Desiccant Dryer
Desiccants absorb water by pulling it out of the surrounding air or by chemically binding with it. When choosing one of these devices, look for one that has a rating higher than 2 percent relative humidity (RH). For example: a 6-pound capacity model should be able to absorb at least 1 pound of water at 98 percent RH or less (6 x 0.02 = 0.12). If you want to be extra careful about moisture removal, consider getting an even larger unit (one that can hold up to 10 pounds) .
If you're a 3D printer owner, you know how frustrating it can be to get your prints dry.
Prints that are too wet can warp, curl and even snap under the weight of the print head. Prints that are too dry will take forever to cure and may end up with uneven layers of color.
Drying your filament is an essential part of 3D printing. You want to make sure that your print comes out with minimal defects, so you need to be sure that all moisture has been removed from the filament. If you don’t do this, then you run the risk of having bubbles in your print, which can make it look less than desirable.
You may have heard of the term "filament dryer" before, but what does it do, exactly? Filament dryers are an essential tool for any 3D printer owner. They're designed to keep your filament from getting too moist or even moldy in your filament box. This can cause problems with printing later on because the moisture will interfere with the bonding of your filament to the print bed, causing it to warp and deform during printing.
If you've ever had issues with moisture-related defects in your prints, then you know what a frustrating problem this can be! Now that you know about filament dryers and how they work, let's take a look at some of the best options available today:
A filament dryer is a great way to ensure that moisture doesn't ruin your prints.
The problem with printing with ABS filament is that it's prone to warping and cracking if the humidity is too high. If you live in an area with high humidity or have a basement or garage that's not well-sealed, this could be a problem.
A filament dryer is a small device that helps you dry out your unused ABS filaments by bringing them up to temperature and slowly letting them cool down.