Maximizing Your 3D Printing Investment with a Dryer Box — fixdry Skip to content
Maximizing Your 3D Printing Investment with a Dryer Box

Maximizing Your 3D Printing Investment with a Dryer Box

Dryer box

A dryer box is a great way to keep your filament dry and ready for printing. This can be especially helpful in humid climates, or if you want to make sure the filament will print evenly.

It is a container that allows you to store your filament in a certain environment. It can be very simple or very complex, depending on your needs and budget. A simple dryer box can be made out of cardboard boxes, while a more elaborate one might have an internal temperature control system and an LED light inside.

What are dryer boxes?

3D printer filament dryer boxes are containers that allow you to store your 3D printing filament in an airtight environment. You can then use them to dry out your filament before loading it into your printer again. This ensures that your material remains as fresh as possible and protects it from getting damaged by moisture.

The main benefit of using a dryer box is that it prevents moisture from building up inside of your spool of filament. The problem is that moisture can cause problems with the quality of your print job, especially when you’re working with dual extrusion materials like ABS or PLA plastic filaments.

How do they work?

The dryer box works by heating up an enclosed space while keeping all moisture out of it. When you place an object inside the chamber, A fan blows air through a filter into a chamber containing desiccant material (either silica gel beads or molecular sieve). The fan then removes the dried air from this chamber and uses it to cool down the printed part before ejecting it from the machine, it will begin drying out until it reaches its full potential as a strong and durable product. Once your object has reached its desired consistency, you can take it out of the chamber and continue working on it until it's ready for use by.

3D printing is a technology that has the potential to revolutionize many industries. From medical applications to construction and design, it's clear that 3D printing can have a major impact on the way we do things. However, with such an expensive technology, how can you maximize your investment? 
Here are a few tips for maximizing your investment in 3D printing:

1. Maximize Your Investment by Using a Dryer Box

A dryer box is a tool used to dry out ABS plastic filament after it's been printed. The process of 3D printing involves melting the plastic filament into layers that are then cooled down before being melted again for the next layer and so on. This process leaves some excess material in the print which needs to be removed before you can use your print as intended. If you don't remove this excess material, it could cause problems later on when you try to use or assemble your print.

A dryer box is used to keep the temperature of your print bed at optimal levels during a print job. This helps to ensure that there is no warping or defects in the finished product. A dryer box also adds extra protection from outside elements like dust and debris. If you don't have one of these boxes yet, then consider purchasing one as soon as possible.

2. Maximize Your Investment by Using Support Material

You can maximize your 3D printing investment by using support material. Support material is a special type of filament that is used to create scaffolding for your print. It is often used when printing models with overhangs or small details that may be difficult to print without the proper support.

The support material will hold up the entire model while it's being printed, so you don't need to worry about parts falling off before they're finished printing. When printing with SLA resin, some companies will even use support materials in their final products because they are so durable.

3. Invest in quality software

The software used to control the printer can make or break a job. If you're not familiar with CAD programs like SolidWorks or AutoCAD, I would encourage you to learn how to use them before investing in a printer! It will be worth it once you're able to create your own models from scratch without having to rely on others for help!

4. Get familiar with post-processing techniques

Once you have optimized your CAD files for printing, it's important to learn about post-processing techniques. This includes priming, washing/drying and curing methods as well as coating techniques such as vapor deposition or dip coating. These techniques help ensure that printed parts are smooth and strong enough for use in manufacturing applications.

Previous article Breaking Down the Different Materials Used in 3D Printing

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare


Net Orders Checkout

Item Price Qty Total
Subtotal $0.00

Shipping Address

Shipping Methods