Fixdry High Value 3D Filament 2 Spools Compatible Dryerbox ‚ÄĒ fixdry Skip to content

FIXDRY 3D Filament 2 Spools Compatible Dryerbox DOUBLE-NT1


Save $245.00 Save $50.00
Original price $129.99
Original price $129.99 - Original price $519.96
Original price $129.99
Current price $79.99
$79.99 - $274.96
Current price $79.99

Free Shipping in 4-7 days

5+ in stock, ready to be shipped
5+ in stock, ready to be shipped
5+ in stock, ready to be shipped
5+ in stock, ready to be shipped
5+ in stock, ready to be shipped
5+ in stock, ready to be shipped
Quantity: DOUBLE-NT1 *1
The Features For 2 Spools Compatible Dryer Box

‚≠źÔłŹ-Large Capacity. Hold 1 Roll of 3kg or 2 Rolls of 1kg Filaments.

‚≠źÔłŹ-Drying Temperature Up to 70‚ĄÉ. Compatible with More Material Such as¬†Nylon,
PC, PETG, TPU, ABS, ASA, PP, PLA, PVA, PA, Wood, Silk, etc. 

‚≠źÔłŹ-110W¬†PTC Heater. Improve More Efficiency Compared to PI Heater.
Save Your Time and Money.

‚≠źÔłŹ-Built-In Fan.¬†Even Heating, and¬†Remove Moisture Comprehensively.

‚≠źÔłŹ-10 Routing Holes for Convenience.¬†Meet the Multi-Direction Export & Provide Convenience. Achieve Printing while Drying.

‚≠źÔłŹ-Independent¬†Humidity¬†Detector.¬†Provide More Accurate Data.

Product Specifications

Item Weight: 5.1 pounds
Product Dimensions:12.2*8.19*13.54 inches
Cover Material: PC
Material Type: Stainless Steel
Capacity: 1 Roll of 3kg / 2 Rolls of 1kg Filaments.
Drying Temperature: 20-70‚ĄÉ
Optional Drying Time: 0-48h
Diameter Format: 1 spoolÔľú174mm, 2 spoolsÔľú80mm


1. If the dryer box can be always on?

Yes, it can be.
The heating time can be set based on your requirement, the countdown setup is from 0 hour to 48 hours and the shutdown is accurate to minute. You can set unlimited heating as well. In this setting, the dryer boxes are in the normally open state.

2. Is this dryer box safe for wood filament?

Yes, it is.¬†The dryer box can be suitable for many material, including wood„ÄĀABS„ÄĀASA„ÄĀPC and so on.

3. What is the input voltage of the dryer box?

The product input voltage is AC 100v - 240v, 50/60Hz per product parameter.

4. What is the maximum size of printing filament that can be placed in the 2 spools compatible dryer box?

The maximum size that Double-NT1 can accept is 217*176mm.

5. What is the heating method of 2 spools compatible drybox?

We use PTC heating method to dehumidify while heating. The air outlet temperature is closest to the displayed temperature.

6. None of the commercially produced dryers seem to be able to expel water. Sovol suggested opening the lid for the SHO1 I had and leaving open holes for the filament to use inside the box, how to solve these problems?

Our Fixdry products have a built in-fan, so you don't need to worry about those problems.

7. Sunlu S2 only has a 1-port filament outlet, which, coupled with a single-sided display, makes it hard to fit on my desk, how can I solve these problems?

Our Fixdry 3D Filament 2 Spools Compatible Dryerbox DOUBLE-NT1 has 10 holes, FIXDRY 3D Printer Filament Knob Dryer Box NT1 and  Touch Screen Dryer Box NT2 has 2 holes, so they won't exist such problems above.

30 Days Return & Shipping Policy

This return policy expires 30 days after your order is delivered.

Remember to keep the receipt of your order and provide it to the Fixdry support team. Then, our team can locate your order information.

It takes 1-2 business days to process your order. The delivery time varies from 3 to 5 business days according to your address. Please note that we ship to the continental US and Europe area. We are striving to deliver to more locations, and sorry for the current inconvenience.

Click Here to Read More Details

Product Comparison
Filaments Drying Temperature Form

Look How Our Dryer Box Works

Product Unique Features

110W PTC Heater

110W PTC Heater

FIXDRY 3D Filament 2 Spools Compatible Dryerbox has a 110W PTC Heating System. It makes the actual internal temperature more stable, reduces humidity faster, and saves electricity and money. It makes the dryer box more durable, helps you continue to enjoy high-quality printing, more energy saving and environmental protection, overheating protection, and ensures your safety.

Drying Temperature Up to 70‚ĄÉ

Drying Temperature Up to 70‚ĄÉ

The drying temperature of our FIXDRY 3D Filament¬†2 spools compatible dryer box is 20-70‚ĄÉÔľĆand the material capability include Nylon, PC, PETG,¬†TPU,¬†ABS,¬†ASA, PP,¬†PLA, PVA, PA, Wood, Silk, etc.¬†The drying temperature of many other dryer boxes can only up to 55‚ĄÉ. The temperature is too low and it is not suitable to dry more¬†material because these materials such as Nylon, ¬†ABS,¬†ASA, Wood, Silk and etc. have a high viscosity at low temperature and it is difficult to flow out of the mold cavity during the injection molding process.

Large Capacity

Large Capacity

FIXDRY 3D Filament 2 Spools Compatible Dryerbox has a Large Capacity. It can use 2 rolls of 1kg filament, or 1 roll of 3kg filament at the same time. It is suitable for multiformat filaments, which include 1.75mm/2.85mm/3mm. You can also put 4 rolls of 0.5kg filament in it, which can improve your drying and printing efficiency, save your time and money.

10 Routing Holes for Convenience

10 Routing Holes for Convenience

FIXDRY 3D Filament 2 Spools Compatible Dryerbox has 10 Routing Holes. It is able to achieve printing while drying. A total of 10 holes are set on the shell, which can make multi-directional outlets possible. Besides, it can satisfy the use of various or multiple printers types simultaneously, and it can prevent the filament from getting tangled. If the routing hole is limited, you will meet the problem that the screen cannot be seen clearly when you printing and drying at the same time, since the screen is easily blocked by the printers and filaments.

Built-In Fan

Built-In Fan

FIXDRY 3D Filament 2 Spools Compatible Dryerbox has a Built-In Fan, and it makes the air heated evenly, better discharge of moisture, improve dryer efficiency, and helps you avoid placing desiccant to dehumidification.

The Display of Printed Products

Product usage reminder

1, You need to lubricate the bearings regularly.

2, DO NOT insert the power cord into the socket, when not in use.

3, DO NOT touch the heating hole directly in order to avoid scalding.

4, When the product malfunction, please cut off power and contact us or the distributor, do not try to fix it yourself.

  • Selecting a Good Dryer Box or Filament Dryer for your Filament
    april 6, 2024 Fix Dry

    Selecting a Good Dryer Box or Filament Dryer for your Filament

    In¬†order¬†to¬†ensure¬†the¬†longevity¬†and¬†quality¬†of¬†your¬†3D¬†printer¬†filament,¬†a¬†good¬†dryer¬†box¬†or¬†filament¬†dryer¬†is¬†essential.¬†One¬†such¬†option¬†is¬†the¬†FIXDRY¬†3D¬†Filament¬†2¬†Spools¬†Compatible¬†Dryerbox¬†DOUBLE-NT1.¬† Let's¬†take¬†a¬†closer¬†look¬†at¬†its¬†features¬†and¬†advantages: SHOP¬†NOW Features¬†of¬†FIXDRY¬†3D¬†Filament¬†2¬†Spools¬†Compatible¬†Dryerbox¬†DOUBLE-NT1: Large¬†Capacity:¬†The¬†DOUBLE-NT1¬†dryer¬†box¬†can¬†hold¬†1¬†roll¬†of¬†3kg¬†filament¬† or¬†2¬†rolls¬†of¬†1kg¬†filament,¬†allowing¬†you¬†to¬†dry¬†a¬†significant¬†amount¬†of¬†filament¬†at¬† once.¬†Drying¬†Temperature¬†Up¬†to¬†70‚ĄÉ:¬†This¬†dryer¬†box¬†is¬†compatible¬†with¬†a¬†wide¬†range¬†of¬†materials¬†such¬†as¬†Nylon,¬†PC,¬†PETG,¬†TPU,¬†ABS,¬†ASA,¬†PP,¬†PLA,¬†PVA,¬†PA,¬†Wood,¬†Silk,¬†and¬†more.¬†Its¬†maximum¬†drying¬†temperature¬†of¬†70‚ĄÉ¬†ensures¬†efficient¬†drying¬†for¬†different¬†types¬†of¬†filaments.110W¬†PTC¬†Heater:¬†The¬†PTC¬†(Positive¬†Temperature¬†Coefficient)¬†heater¬†in¬†the¬†DOUBLE-NT1¬†dryer¬†box¬†improves¬†efficiency¬†compared¬†to¬†traditional¬†PI¬†heaters.¬†This¬† saves¬†you¬†both¬†time¬†and¬†money.Built-In¬†Fan:¬†The¬†built-in¬†fan¬†ensures¬†even¬†heating¬†and¬†comprehensive¬†moisture¬† removal,¬†resulting¬†in¬†thoroughly¬†dried¬†filament.10¬†Routing¬†Holes¬†for¬†Convenience:¬†With¬†10¬†routing¬†holes,¬†this¬†dryer¬†box¬†provides¬†multi-directional¬†export¬†and¬†convenience.¬†It¬†allows¬†you¬†to¬†achieve¬†printing¬† while¬†drying,¬†enhancing¬†efficiency.Independent¬†Humidity¬†Detector:¬†The¬†DOUBLE-NT1¬†dryer¬†box¬†features¬†an¬† independent¬†humidity¬†detector¬†that¬†provides¬†more¬†accurate¬†data,¬†ensuring¬†precise¬†control¬†over¬†the¬†drying¬†process.Frequently Asked Questions about the FIXDRY 3D Filament 2 Spools Compatible Dryerbox DOUBLE-NT1: Can the dryer box be always on? Yes, it can be. The dryer box allows you to...

    Read now
  • The Origin Of PLA And Its Importance In 3D Printing
    september 17, 2023 Fix Dry

    The Origin Of PLA And Its Importance In 3D Printing

    PLA filament is one of the most popular 3D printing materials on the market. It's easy to work with and has a relatively low melting temperature, making it ideal for printing more complex objects. PLA is made from natural crops...

    Read now

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare


Net Orders Checkout

Item Price Qty Total
Subtotal $0.00

Shipping Address

Shipping Methods